An EV charger in the City of Orlando needs an electrical permit with an associated engineering permit, issued to a licensed general or electrical contractor, plus signed and sealed plans. The typical install is $800–$2,500 without the charger. Sealed plans and the engineering permit aren't in that price, so your electrician quotes them.
What does Orlando require for a home EV charger?
Two permits, sealed plans and a licensed contractor. That comes from the city's EV charging permit page, which lays the process out like this:
- Submit an electrical permit application.
- Prepare documents. Signed and sealed plans are required.
- If the project value exceeds $5,000, file a Notice of Commencement with the Orange County Comptroller before work starts, post a certified copy at the job site and give the city a copy.
- Submit plans digitally through the city's ProjectDox system.
- Check plan status. The city says review time varies with project scope and type.
- Pay the permit fees once the application is approved.
In the City of Orlando, the typical price covers the install and an electrical permit. It wasn't built around signed and sealed plans or an engineering permit, so expect those on your quote as extra lines.
What does an Orlando EV permit cost?
The electrical part follows the fee schedule. Orlando's January 2026 schedule sets the electrical permit at $66.24 for the first $1,000 of construction cost, plus $11.03 for each additional $1,000, plus a 3% technology surcharge. Engineering fees have their own section, and your electrician can tell you what the two come to on your job.
Will a charger push my Orlando job past $5,000?
Not at the typical price, which tops out at $2,500. Sealed plans and permits add to that, and a panel upgrade in Orlando on the same project could take the value over the Notice of Commencement line. One more reason to settle the capacity question first.
Can my Orlando panel handle a Level 2 charger?
A load check tells you. The US Department of Energy points out that not every home has the capacity for Level 2, and that a qualified electrician can add circuits to get there. Orlando's median home dates from 1992, but about a third of its housing is from 1979 or earlier, so plenty of panels here could go either way.
Which charger setup should I ask for?
Start with what plugs into your car. A Tesla Wall Connector is hardwired, and a NEMA 14-50 outlet suits a plug-in charger. Distance from the panel moves the price most.
Your bill will say whether you're on Orlando Utilities Commission or Duke Energy Florida. When you're ready, get your EV charger price with the panel-to-parking distance if you know it. For other Orlando work, see the Orlando electrician page.
Common questions
Do I need a permit for an EV charger in Orlando?
Yes. The city says you need an electrical permit with an associated engineering permit, issued to a licensed general or electrical contractor.
Can I pull the Orlando EV permit myself?
The permits are issued to a licensed general or electrical contractor, so hiring one is the plain route. You can check any license with the state's lookup.
Does the typical price cover Orlando's permits and plans?
Not all of it. The typical price includes an electrical permit, but it wasn't built around sealed plans or an engineering permit. Your electrician quotes those for an Orlando job, so you see the full number before work starts.
Do I need a Notice of Commencement for an EV charger in Orlando?
Only if the project value exceeds $5,000, the city says. It's filed with the Orange County Comptroller before work starts.
